I guess you can say that I have gone origami crazy! After my
Today I am sharing my new jewellery DIY project with you: an origami swan made out of copper foil.
Copper foil is a material that always seemed way to advanced to use. I would see a pretty pendant or a pair of earrings on Etsy and figured that the only way that I could make something like that would require some serious professional tools.
But guess what, I could not have been more wrong! When walking in a big craftstore here in Berlin (
After making a couple of different shapes I decided to share my Origami Swan pin with you. It’s easy, it doesn’t require lot’s of supplies and you can turn it into a brooch, necklace, earrings, and so much more!
Origami Swan DIY:
I bought two pieces of foil and started experimenting with it. And it is such a fun material to use!
Here are some things I learned about using copper foil:
– Up to 0.3mm foil is perfectly suitable to be cut with regular scissors.
– Up to 0.2mm foil also let’s itself be cut with a hobby knife, making it possible to create a stencil, etc.
– Once you make a crease, it is almost impossible to remove it, so plan ahead with your design.
– You can use a pushpin to make holes in the thinner pieces of foil, perfect for including hoop rings.
For this tutorial I found that up to 0.2mm foil works the best (thicker than that, and it will be hard to fold the last steps of the swan)
– Copper foil/plate or silver foil/plate – Mine was 0.1mm thick. You can also use 0.2mm. (I don’t recommend using a thicker version than that)
– Pin/ Brooch
– Jewellery Glue
– Decide the size of your swan. If your are not sure, I suggest looking at the size of your brooch and go from there.
– Draw a square in your desired size onto a piece of paper. (I used a post-it, because the sticky part will come in handy later on. But any kind of paper will work.)
– Cut the square out of the paper with your scissors.
– Place your paper onto the copper foil . Cut the square out of the foil with your scissors. Try not to let the foil bend too much. Any crease will be hard to remove from the material.
– You will now have your square ready. 1 Square is good for two origami swans. If you would like to make more, you can cut as many squares as you would like.
– Cut the square in half, following the diagonal line.
– Place your triangle onto a flat surface.
– Fold the triangle as shown above.
– Flip your foil vertically and fold as shown above.
– The basis is ready, now it’s time for the neck: Fold the neck as shown above. The angle of the fold will decide the angle of the neck.
– Fold te tip of the neck as shown above, to create the ‘face’ of the swan.
– Add a drop of jewellery glue to the back of the swan and press the brooch or pin onto the back.
– Let the glue dry for a couple of hours before wearing your pin.
Style tip: Combine the brooch with other pins on a sweater or jacket. I have been spotting many pins and brooches on the runway for next season and I love that they are coming back in style!
Since the material is fairly cheap and you won’t need much to make a piece of jewellery, this would make a great gift! Bridesmaids, friends, mothers day, you name it! (or keep it all to yourself and embrace the compliments you will be getting ;)
I will also share another copper foil tutorial this month, involving a thicker piece of foil and an unexpected extra material. Curious? Stay tuned!