You might remember the
Our cat decided to photobomb. For some reason she doesn’t mess with balloons at all, but really wanted to take a better look at this cooler haha!
Cooler (we got ours
2 cans of yellow spray paint
Light green craft foam
Brown adhesive vinyl or paint pen
Permanent bond craft glue
1. Wipe the cooler of any dust or dirt. Tape off any parts of the cooler that you don’t want to be painted.
2. In a well-ventilated area, paint the whole cooler yellow with spray paint. We had to do two coats of paint on ours, but it depends on what kind of paint you buy. Allow the paint to dry completely. Once the paint has dried, remove the tape from the areas you taped off. Set aside.
3. Using green craft foam, cut out different sizes of pineapple leaves and glue them together on the lid of the cooler. We only put leaves on the front of our lid so that we could still get to the handle easily. Allow the glue to dry completely before placing the lid back on the cooler.
4. We used adhesive vinyl to put a little pineapple pattern on the cooler, but we found that a paint pen is better for longer use. If you want to use vinyl, cut out “u” shapes and stick them to the cooler in a pattern. If you want to use a paint pen, draw the pattern onto the front of the cooler and allow for it to dry completely.
5. Let the cooler sit overnight to make sure that the spray paint isn’t still tacky before loading it up with your favorite drinks and heading out to the beach!
Grab those sodas, we’ve got a beach day to plan with this fun, new cooler! What other last minute Summer projects do you want to see? We’ve got back-to-school DIYs coming next week, so get ready!!